Fibre Wall Outlet : FWOA-XX-AP/WH

Fibre Optic Internal Enclosure, Artikelnummer: 857-01625

Eigenschappen

  • 1 x LC APC Duplex Adaptor and 2 x LC APC Pigtails
  • Install directly on the wall or onto a flush-mount back box
  • Cable entry at the base, through the rear of the unit or at the sides
  • Accommodates up to 4 splice protectors (up to 45mm)
  • Quality surface finish
  • Tamper-proof latches
  • Positive fibre management to ensure a 30mm minimum bend radius

Toepassing

"The wall mounted fibre optic outlet allows a fibre optic cable to be connected directly into the end user apartment."

Colour White (WH)
Connector Colour Green (GN)
Connector Type LC-APC
Content Fibre Wall Outlet 1 x LC APC Duplex Adaptor 2 x LC APC Pigtails Wall Mounting Kit
PART DESCRIPTION FWOA-XX-AP/WH
Product Description FWO with 1 x LC DX APC Adaptor and 2 x LC APC Pigtails.
Product Family Fibre Optic Internal Enclosure
Product Group Fibre Wall Outlet
Splice Capacity 4
Technical Description The closure is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The closure has 2 bottom and 1 rear cable entry point. The closure is supplied with a single LC APC Duplex fibre adaptor and 2 x LC APC Pigtails. Fibre management features ensure a minimum bend radius of 25mm is maintained as the bare fibre is routed through the outlet and press fit strain relief features secure the incoming cable whilst cable tie anchor points are provided for additional strain relief. Screw holes allow for easy installation and positioning, alternatively the recessed base means the closure can be fastened with adhesive, maintaining the outlet flush to the wall.
Depth (D) 21mm
Height (H) 85mm
Width (W) 85mm
Material Acrylonitrile Butadiene Styrene (ABS)
EAN / GTIN 5022660166433

Blijf in contact!


Update: 14/10/2019 © HellermannTyton 2019
Contact